Engineering preliminary design methods for approximating and predicting the effects of viscous or equivalent viscous-type damping treatments on the free and forced vibration of lightly damped aircraft-type structures are developed. Similar developments are presented for dynamic hysteresis viscoelastic-type damping treatments. It is shown by both engineering analysis and numerical illustrations that the intermodal coupling of the undamped modes arising from the introduction of damping may be neglected in applying these preliminary design methods, except when dissimilar modes of these lightly damped, complex aircraft-type structures have identical or nearly identical natural frequencies. In such cases, it is shown that a relatively simple, additional interaction calculation between pairs of modes exhibiting this 'modal response' phenomenon suffices in the prediction of interacting modal damping fractions. The accuracy of the methods is shown to be very good to excellent, depending on the normal natural frequency separation of the system modes, thereby permitting a relatively simple preliminary design approach. This approach is shown to be a natural precursor to elaborate finite element, digital computer design computations in evaluating the type, quantity, and location of damping treatment. Young, Maurice I. Unspecified Center AIRCRAFT DESIGN; AIRFRAMES; DYNAMIC STRUCTURAL ANALYSIS; RESONANT FREQUENCIES; VIBRATION DAMPING; VISCOUS DAMPING; DYNAMIC RESPONSE; FINITE ELEMENT METHOD; FORCED VIBRATION; FREE VIBRATION; HYSTERESIS; MODAL RESPONSE...